Mitsubishi Photos

2013 Mitsubishi EVO X ETS Intercooler Upgrade

ETS Intercooler Upgrade on 2013 Mitsubishi Evo X

ETS Intercooler Upgrade installed on a modified 2013 Mitsubishi Evo X with Wicked White paint. The ETS Intercooler Upgrade provides the best possible air flow distribution through the intercooler core height making sure that all charge rows are used effectively. The ETS Intercooler Upgrade is bolt on, above the factory under tray and sits behind the factory crash beam of any 2013 Mitsubishi Evo X.

Photo Credit: Unknown
Photo Submitted by: Unknown via Submission Page

2005 Mitsubishi Evo 8 ETS Upper Intercooler Pipe

ETS Upper Intercooler Pipe on 2005 Mitsubishi Evo 8

ETS Upper Intercooler Pipe installed on a modified 2005 Mitsubishi Evo 8 in Graphite Gray Pearl paint. The ETS Upper Intercooler Pipe features 2.5″ mandrel piping and its unique routing is over two feet shorter than the stock upper intercooler pipe which results in greatly improved turbo spool up. The ETS Upper Intercooler Pipe also adds 12% more air flow and saves 6.3 pounds in weight on any modified 2005 Mitsubishi Evo 8.

Photo Credit: Unknown
Photo Submitted by: Unknown via Submission Page

2013 Mitsubishi EVO X Ultimate Racing Titanium Exhaust 20036

Ultimate Racing Titanium Exhaust on 2013 Mitsubishi Evo X

Ultimate Racing exhaust system with titanum exhaust tips installed on a modified 2013 Mitsubishi Evo X with Wicked White paint. The Ultimate Racing exhaust system features 304 stainless steel piping, true 3″ design to maximize airflow, 3/8″ thick machined flanges, TIG welds, dual high-flow mufflers and 4″ titanium exhaust tips. The Ultimate Racing exhaust system is also 100% bolt-on, requires no modification to the vehicle and provides an increase of 11.45 horsepower and 8.08 ft. lbs of torque for any modified 2013 Mitsubishi Evo X.

Photo Credit: Unknown
Photo Submitted by: Unknown via Submission Page

2013 Mitsubishi EVO X ETS Upper Intercooler Pipe and Air Intake

ETS Upper Intercooler Pipe and ETS Air Intake on 2013 Mitsubishi Evo X

ETS Upper Intercooler Pipe and ETS Air Intake system installed on a modified 2013 Mitsubishi Evo X in Wicked White paint. The ETS Upper Intercooler Pipe features 2.50″ mandrel bent piping, comes with 4-ply silicone hose connectors, stainless steel t-bolt clamps and matte black finish. The ETS Air Intake features a 5″ KN Filter, ETS milled MAF adapter, perfrect transition from adapter to MAF, blow off valve recirculation valve, includes a heat shield to prevent idle surge and BOV vacuum line. Adding the ETS Air Intake can add 56 wheel horsepower when used with a boost controller at 22 psi to any modified 2013 Mitsubishi Evo X.

Photo Credit: Unknown
Photo Submitted by: Unknown via Submission Page

2004 Mitsubishi Eclipse Convertible Tein Type Flex Coilovers

2004 Mitsubishi Eclipse Convertible Tein Flex Coilvers

Modified 2004 Mitsubishi Eclipse Convertible in steel blue pearl paint lowered on a set of Tein Type Flex Coilovers.

Photo Credit: Chris Warfield
Photo Submitted by: Chris Warfield via Submission Page

2003 Mitsubishi Evo 8 with AMS Performance Front Mount Intercooler

car-photo-2003-mitsubishi-evo-8-ams-front-mount-intercooler

Modified 2003 Mitsubishi Evo 8 featuring a AMS Performance front mount intercooler.

Photo Credit: Unknown
Photo Submitted by: Unknown via Submission Page

2005 Mitsubishi Evo 8 with ETS Front Mount Intercooler

car-photo-2005-mitsubishi-evo-9-extreme-turbo-systems-ets-front-mount-intercooler

Modified 2005 Mitsubishi Evo 9 featuring a Extreme Turbo Systems ETS front mount intercooler.

Photo Credit: Unknown
Photo Submitted by: Unknown via Submission Page

2010 Mitsubishi Evo X with AMS Upper Intercooler Pipe and Air Intake

car-photo-2008-mitsubishi-evo-x-ams-intake-upper-intercooler-pipe-kit

Modified 2010 Mitsubishi Evo X engine bay featuring an AMS Performance upper intercooler pipe and air intake kit.

Photo Credit: Unknown
Photo Submitted by: Unknown via Submission Page